The impedance of a rectangular waveguide wave varies by mode. For the common TE10 mode at 10 GHz, if the waveguide’s wide side is 2.286 cm, the characteristic impedance is approximately 377 ohms, calculated using the formula 𝑍=𝜂1−(𝜆2𝑎)2Z= 1−( 2aλ ) 2 η where 𝜂η is about 377 ohms. TE mode In the most […]
What is the impedance of a rectangular waveguide wave Read More »
Place the antenna booster as close to the antenna as possible to minimize signal loss, ideally within one meter, as signal attenuation occurs at about 3dB per meter of coaxial cable. Near the antenna For the antenna amplifier to work best, it should be placed as close to the antenna as possible. The signal in
Where should an antenna booster be placed Read More »
Dolph Microwave warrants our products to be free from defective material and workmanship for a period of one year from the date of delivery. All defective parts will be replaced and repair work required by normal use will be performed, without charge, within this one year period. This warranty shall be exclusive and in lieu of all other warranties expressed or implied.
FengHuiNan Road NO.34, High-Tech Zone, Xi an, China
Tel/Fax: (+86) 29-8881-0979
E-mail: Sales@dolphmicrowave.com